FOLDING AND STACKABLE MOVABLE PARTITIONS

Mobile room dividing panels for separating spaces

The folding and stackable movable partitions are an ideal solution that gives us the architecture to make a flexible compartmentalization of spaces.

That is to say, thanks to them we can close a room without building work. They allow us to modify and separate rooms according to the needs of the case.

Movable partition walls are widely used in showrooms and offices, but they are also :

  • Hotels
  • Auditoriums
  • Educational centres
  • Offices

They allow the size of the room to be adapted to the requirements of each event, recovering the format of the room afterwards.

Any project whose objective is the creation of different spaces will find in the sliding panels the best option for quality and price.

The prefabricated partition walls maintain the standards of quality and acoustic attenuation, with attenuations of 35 dB, 38 dB, 40 dB, 45 dB, and 51 dB, depending on the model.

DEMOUNTABLE GLASS AND WOOD WALLS

DESMON’s movable partition systems are characterised by a high level of acoustic insulation or attenuation. Our panels are manufactured, assembled and arranged in independent modules.

Their main characteristic is that they slide along the installation of aluminium rails and with bearings. Some of our models can be stored folded so as not to take up useful space.

These interior dividing panels adapt to the characteristics of the space where the project is developed, they can be manufactured in heights of up to 7 metres, with models that can have integrated doors.

The mobile partition wall modules are manufactured with a metal frame or frame and anodised aluminium profiles. The assembly of the panels when assembled is carried out by means of rubber adjustment and magnetic profiles.

Inside they are filled with high-density rock wool.

SUSPENSION SYSTEM FOR FOLDING AND STACKABLE MOVABLE PARTITONS

The suspension system of the movable partition walls, with an upper guide made of extruded aluminium with a lacquered or anodised surface finish, fixed to the slab or auxiliary structure by means of a system of plates and levelled by means of threaded rods.

It is installed without any element on the floor to obstruct the passage, allowing us to store the mobile panels in the most suitable place while maintaining the ergonomics and decoration of the environment.

The folding and stackable mobile partitions are formed by an extruded aluminium structure, with an anodised or lacquered surface finish. Due to its design, the vertical tongue-and-groove joint between panels ensures the union between them.

At the same time it acts as a support for the panels. The vertical rubber gasket helps to increase the acoustic attenuation of the movable partition.

The folding partitions are designed in such a way that they are perfectly integrated and adjusted to the ceiling, walls and floor. Their use is the best solution for the combination of optimising spaces and for soundproofing rooms or workspaces. In the manufacture of Desmon partitions, a layer of high-density rock wool is used on the inside of the partition, ensuring the soundproofing and acoustics of the room.

Desmon has various models of sliding partition walls, depending on the type of collection. Contact us if you want to know how to make an economical partition wall without sacrificing quality.

Folding and stackable movable panels can be classified into:

ACCORDING TO THE TYPE OF STORAGE OF THE MOVABLE PANELS

MONODIRECTIONAL MOVABLE PARTITION

Monodirectional movable panels only move in one direction along the guide – mono (one) direction. With this type of movable partition, the panels can be stored at any point along the guide. The movable panels have a single pulley.

This type of folding partition wall provides a perfect solution for those spaces where the partitioning of spaces is linear, so that the panels will move longitudinally along the guides.

The storage of the modules is done at the ends of the guides and rails easily and in a few minutes, the storage can be done so that they are in sight or embedded in a properly designed cabinet, the latter being an option that allows 100% of the space.

 

MULTIDIRECTIONAL SLIDING PARTITION WALL

The multidirectional sliding partition walls, by means of auxiliary guides, can be stored in the place chosen by the client. The mobile panels have two pulleys.

This type of mobile partitioning allows the division of spaces in a more dynamic way, being able to compartmentalise spaces in any direction and in a modular way, according to the characteristics of the design and the dimensions of the space.

  • Tabiques moviles almacenaje
  • Tabiques móviles plegables y apilables
  • Tabiques moviles almacenaje
  • Tabiques moviles dobles
  • Tabiques moviles colores

DEPENDING ON THE TYPE OF PROFILING THE FOLDING AND STACKABLE MOVABLE PARTITIONS CAN BE:

Exposed profiling

65 mm thick movable partitions, with an aluminium tongue and groove profile that embraces the wooden panel.

The surface finish of the aluminium profiles can be anodised or lacquered according to Qualanod or Qualicoat standards, with standard colours or any RAL colour on request.

 

Concealed profiles

114 mm thick movable partitions, with the aluminium tongue and groove profile concealed by the finishing board.

The surface finish of the aluminium profiles can be anodised or lacquered according to Qualanod or Qualicoat standards, available in standard colours or on request in any RAL colour.

DEPENDING ON THE TYPE OF SEALING

By means of contact joints

Double 3-rib geonet that can be easily cut to fit in situ to the floor and the lower part of the guide of the movable partition.

An acoustic foam gasket is installed between the two.

Telescopic mechanism

The telescopic mechanism can be operated from the panel edge.

There are 2 types of telescopic sealing:

  • Movable partition with bottom telescopic sealing and top sealing by means of contact seals.
  • Movable partition wall with lower and upper telescopic sealing. This type of sealing is only available on the movable panels with concealed profiles.

Desmon offers the option of manoeuvring the telescopic mechanism in two versions:

  • Mechanically, with a special crank handle supplied with each installation.
  • Electrically, the mobile panels have a lateral “jack”, where the control is connected.
  • Tabiques móviles plegables y apilables
  • Tabiques plegables
  • Tabiques moviles oficinas

LOCKING SYSTEM

Desmon offers two different systems for locking the folding and stackable movable partitions in horizontal position:

Hinged flask

The telescopic rod that locks the movable partition wall is hinged to the wall upright from where it is extracted. It is always fixed to one end of the movable partition wall.

Integrated wall plate

In this version (only in the movable panel version with concealed profile), all the panels are of the same width, with the telescopic part located inside the last panel.

This locking option is ideal for mobile partition walls with a specific storage place.

The combination of the type of storage of the movable panels (one-way/multidirectional) with the type of profiling of the movable panels (visible/hidden) with the type of vertical sealing of the movable partition, together with the acoustic attenuation of the movable panels, gives rise to the different ranges of the movable panels.

TYPES OF FINISHES FOR MOVABLE PANELS IN FOLDING AND STACKABLE MOVABLE PARTITIONS

The external finish of the mobile panels consists of 10 mm thick board in the MV model and 16 mm thick board in the MO model.

These panels can be finished with different materials such as melamine, high pressure laminate (H.P.L.), natural wood veneer, upholstery, etc…

Optionally, the panels can be supplied with Bfs2 fire resistance.

The movable partition walls can incorporate doors in the panels to facilitate access from one side of the compartmentalised room to the other.

The incorporated doors follow the same aesthetics and characteristics as the panel where they are located.

TYPES OF DOORS INCORPORATED IN A PANEL

Single doors: Located in the centre of the mobile panel. Single folding doors, with the same characteristics as the panel, handle with key lock or pass-through lock embedded in the panel, thus avoiding damage to the front and rear panels in the storage area.

Double Doors: Displaced to one side of the mobile panel, it has the same characteristics of the panel, handle with key lock or pass-through lock embedded in the panel, thus avoiding damaging the front and rear panel in the storage area.

One of the leaves is fixed by means of a locking pin, or unlocking, when it is necessary to open the 2 folding leaves.

Tabiques Móviles MO

  • Paneles ciegos de 114mm de espesor
  • Insonorización: 40-45 dB (manual); 46-51dB (eléctrico)
  • Perfilería oculta
  • Sellado superior e inferior mediante juntas flexibles de contacto, mecanismo de sellado a presión o opción mixta
  • Distancia mínima entre forjado/viga de sujección hasta falso techo: 150mm
  • Sellado lateral expansivo a presión
  • Se puede integrar puertas de paso simples o dobles en los paneles o bien utilizar un panel puerta
  • Almacenaje central, lateral o desplazado
  • Posibilidad de accionamiento de los sellados laterales, inferior y superior mediante mando eléctrico

Tabiques Móviles MXV

  • Paneles ciegos, mixtos o acristalados (2 vidrios de 3+3mm), espesor total de 92mm
  • Insonorización: 38dB
  • Perfilería vista de aluminio (plata, blanco o negro – otros colores RAL consultar)
  • Permite la adaptación a panel mixto (madera/vidrio)
  • Sellado superior mediante juntas flexibles de contacto
  • Sellado lateral expansivo a presión
  • Distancia mínima entre forjado/viga de sujección hasta falso techo: 150mm
  • Sellado inferior mediante juntas flexibles de contacto o mecanismo de sellado a presión
  • Se puede integrar puertas de paso simples o dobles en los paneles o bien utilizar un panel puerta

When you want to have a view between the different shared and separated rooms with folding and stackable movable partitions, Desmon has the following models available:

MX MOVABLE PARTITIONS

MX Mobile Panels Series, where the mobile panels are mixed, mobile wood panels and framed glass. The proportion between wood and glass can be customised according to the requirements of each project.

MOVABLE PARTITIONS ML

Mobile Panels ML series consists of 5+5mm glass panels, transparent or acid-etched, with a visible aluminium upper and lower structure. It allows the integration of single or double doors, or the use of a door panel.

Technical characteristics of folding and stackable movable partition walls

Sealing flexible joints

Pressure sealing

Manual actuation

Electric drive

COLLECTION SYSTEMS FOR FOLDING AND STACKABLE MOVABLE PARTITIONS

Tabiques moviles sistema de recogida

If what you need is to make static divisions of space, we have a good alternative to Movable Partitions such as Partition Walls that allow you to adapt the space to the needs of each moment. In a project, the price of a movable partition can be adapted to the real needs of the space and the functions it has to fulfil.

Make an enquiry or ask us for a quote.



    COMPLEMENTARY PRODUCTS WITH FOLDING AND STACKABLE MOVABLE PARTITIONS

    DIVIDING PARTITIONS FOR OFFICES

    The partitions are the best solution because they are prefabricated, dismountable and reusable, with the facility to hide any type of installation.

    OFFICE FURNITURE

    The organisation and distribution of work areas in offices play a major role in productivity.

    RAISED ACCESS FLOORS

    Raised Access Flooring or Raised Access Flooring is formed by the slab or tile and the supporting structure.

    Contact Us

    We're not around right now. But you can send us an email and we'll get back to you, asap.

    Start typing and press Enter to search