FIGHT THE COLD IN THE OFFICE WITH INSULATING FURNITURE

Fighting the cold in the office is an issue faced by many employees. In recent years, there has been a strong focus on open-plan offices. Without a doubt, these are spaces that facilitate communication between employees. The problem comes when it is difficult to heat such large spaces with high ceilings.

It is clear that having a good heating system is the first step to combat the cold in the office. However, it is possible to avoid the low temperatures by betting on a good distribution. The use of insulating materials in the furniture and layout of the office is also a good idea.

It is just when a distribution plan of the work areas is carried out when you have to consider options to avoid the cold. In DESMON we are specialists in office furniture.

We have developed projects in large corporations and that has allowed us to identify a series of resources and elements that favor the maintenance of heat.

In this article we want to talk about how to use efficient furniture to combat the cold in the office. Don’t lose detail.

The space where the work center is going to be set up has a direct influence on how to combat the office.

It is always necessary to bear in mind that a wide and diaphanous space is more difficult to heat. If in addition the ceilings are high the thing is complicated because the heat has to rise. Thus, the area occupied by employees may be a few degrees below that at heights.

Obviously, it is necessary to have a heating system that also includes air conditioning. Whether it is hot air or radiators, it is important that they cover the entire work area.

This is where the first disagreements arise. In the case of central heating it will be impossible to regulate the temperature. In the case of small equipment, the thermostat can be adjusted.

So the first thing to do is to choose a space that is just the right size to comfortably accommodate the workers. The second is to have efficient and effective heating equipment. It is also advisable to prevent cold wind from entering the office by taking preventive measures such as good windows or thermal curtains.

From there, it is possible to combat the cold in the office, designing workspaces that favor thermal insulation. In this matter, DESMON can help you.

Offices or confined areas in an office can be equipped to maintain the temperature of the room. They help to keep us warm and provide privacy. In addition, it is important that they are quick and easy to install.

DESMON Compac screens consist of a 16 mm thick double panel. A 45 mm inner chamber is left between them. It is in this space that a large quantity of rock wool is inserted.

This mineral-based insulation is an excellent thermal insulator that helps to maintain the room temperature. In this way, no leakage will occur. The use of heating will be much more sustainable and efficient because there will be no cold air in the room.

Glass walls are highly decorative and also promote light transmission. In this case, the insulating capacity of the rock wool is replaced by glass. This piece can be single or double thickness, which helps to keep the heat in the room. The joints between the panes are airtight and the aluminium profiles prevent any type of heat loss.

Finally, movable partitions are a very interesting resource when it comes to combating the cold in an office. Imagine that you have a very large space that is very difficult to heat and you don’t make full use of it. In this case, the ideal solution is to set up movable partitions that limit the space. The panels that form these movable walls incorporate a board of a certain thickness that helps to maintain the temperature.

The joint between the panels ensures a complete seal that prevents heat loss through the joints. In addition, it is possible to choose panels of different thicknesses to achieve even greater thermal insulation.

Nobody likes to work in the cold because performance is not optimal. Scientific studies have shown the problems that occur when employees do not enjoy thermal comfort. Here are some of the effects of exposure to cold.

• Distractions. Being out in the cold can distract employees from their daily tasks.
• Lack of concentration. Of course, it is difficult to focus on a task when your hands are cold or shivering.
• Less manual precision. If you work with your hands on small parts, the cold causes a decrease in hand precision.
• Muscle stiffness. The body tends to tense up when cold and this can lead to stiffness or cramps.
• Colds. One of the most common consequences of being cold in the office is undoubtedly catching a cold or flu. This often leads to time off work.

Thermal comfort is indispensable in the workplace. Working at the right temperature and without the cold improves productivity and promotes a positive attitude towards daily tasks.

If you don’t want your office to be full of shivering staff. Employees strapped to hot drinks and wearing thermal socks, offer them a good workspace.

Take preventive measures to avoid the cold and keep warm. Use automatic thermostats. Close doors to keep warm. Make sure that joints are sealed to keep out the cold and promote a comfortable working environment.

In addition, include in your office furniture with insulating materials that favour thermal comfort and avoid cold environments. Our movable partitions can be part of your list of measures to prevent low temperatures.

They are easy to assemble, highly versatile and customisable. In addition, they also favour acoustic insulation and promote the good image of the company.

If you need more information, contact DESMON and get a customised estimate to combat the cold in the office.